Home
T/C Tech
Venture
Icon
Encore
Encore Pro Hunter
Triumph
G2 Contender
Omega
Muzzleloaders
Rimfire Rifles
Youth Models
Dealer Exclusives
Video & T/C TV
Pro Hunter Journal
Trophy Room
G2 Contender
The Legacy Continues
Since the first Contender pistol was made in 1967, the Contender® has been the choice of serious handgun hunters throughout the world. The reputation this pistol has achieved in terms of its versatility, “minute of angle” accuracy and proven long range performance is unquestioned. When demanding hunters and IHMSA target shooters wanted a handgun that would perform, they chose the Contender. 35 years later, the second generation Contender Pistol emerges and it only got better.
Shown here is the G2 Contender® Rifle, .45/70 Govt., 23" Stainless Barrel, Composite Stock. No. 1320 and the G2 Contender® Pistol .22 LR Match, 12" Blued Barrel, Walnut Grip, No. 2702.
Interchangeability
Maintaining the same barrel interchangeability, the same time-proven long range accuracy, and the same adaptability of converting to rim fire or center fire, the new G2 Contender® has added some features which make it even more user friendly in the field. In addition, the grip, frame, and forend have been profiled and sculpted for a more modern and streamlined appearance. Size and weight remained approximately the same, adding less than 1/10th of a pound to the frame assembly.
Versatility
The Versatility of the G2 Contender® is unmatched by any other handgun in the world. From plinking and small game hunting with rimfire cartridges, to varmint and big game hunting with centerfire rifle cartridges, the G2 Contender will continue to be the handgun of choice for those that pride themselves in wanting only the best.
New Features of the G2 Contender®
- Easier to open.
- More clearance between the grip and the trigger guard. New ergonomic grip.
- Incorporates a Patented automatic hammer block safety with built-in interlock. (patent # 5,680,722)
- Allows shooters to cock the hammer, lower it, and re-cock it without the need to break the action open again.
G2 Contender® Compatibility with Old-Style Contenders
The G2 Contender frame will accept all Contender barrels and their corresponding forends (except Herrett forend). The G2 frame will not accept old-style grips because of the change in grip angle. Blued or stainless barrels are readily interchangeable.
G2 Contender Rifles
At only 5.4 lbs., you won’t find a handier, more versatile rifle anywhere.
The G2 Contender® rifle is a compact rifle boasting the same versatility and accuracy found with the G2 Contender® pistol.
It features readily interchangeable 23" barrels, enabling the shooter to select from 9 different cartridge options; from .17 HMR, up to 6.8 Rem or .45/.70 Gov’t. In addition, all of the 16-1/4" and 21" barrels made for the old style Contender will readily fit the new G2™ frame. The high comb on the buttstock allows the shooter’s eye to be in perfect alignment when using a scope.
Its versatility, with regards to selecting either rimfire or centerfire barrels, makes it a multi-use rifle. It’s an ideal plinker, small game and varmint rifle, and is one of the lightest hard-hitting deer rifles there is. It’s as home in a trapper’s pack basket as it is in deer camp. ...And as a “carry gun”, they don’t get any better. It will become your favorite in any of the seasons.
NOTE: All Thompson/Center Rifles and Pistols are packaged with complete instructions. These instructions must be read before using the firearm. Consumers who purchase Thompson/Center firearms (new or used) and do not receive this material should write to our factory. The proper literature will be sent to them free of charge. Specify serial number.
G2 Contender Pistols
NOTE: All Thompson/Center Rifles and Pistols are packaged with complete instructions. These instructions must be read before using the firearm. Consumers who purchase Thompson/Center firearms (new or used) and do not receive this material should write to our factory. The proper literature will be sent to them free of charge. Specify serial number.
G2 Contender Innovations
.45/410 Models include removable choke Tube and wrench. * Not for sale in California.
Manual Firing Pin Selector.
By simply pulling up and back on the trigger guard spur you can open the G2 Contender® action to load and unload the chamber.
Barrels for the G2 Contender can be changed in only seconds by removing the forend and tapping out the barrel/frame hinge pin. All Contender barrels will fit; blued and stainless barrels are interchangeable.
G2 Contender Specifications
G2 Contender® Rifles:
| \\\\ G2 CONTENDER RIFLES & BARRELS | ||||||
|---|---|---|---|---|---|---|
| Caliber Selection | Frame Assembly | Finish Metal/Stock | Barrel Length/Specs | Barrel Only Part No. | Forend Only Part No. | Complete Gun Part No. |
| 17 HMR | 8720 | Blued/Walnut | 23" No Sights | 4210 | 7689 | 1237 |
| 8770 | SST/Composite | 23" No Sights | 4247 | 7735 | 1304 | |
| 22 LR Match | 8720 | Blued/Walnut | 23" No Sights | 4220 | 7689 | 1239 |
| 8770 | SST/Composite | 23" No Sights | 4261 | 7735 | 1306 | |
| 5MM REM MAG | N/A | Blued | 23" No Sights | 4198 | N/A | N/A |
| 204 Ruger | 8720 | Blued/Walnut | 23" No Sights | 4246 | 7689 | 1206 |
| 8770 | SST/Composite | 23" No Sights | 4259 | 7735 | 1308 | |
| 223 Rem | 8720 | Blued/Walnut | 23" No Sights | 4224 | 7689 | 1241 |
| 8770 | SST/Composite | 23" No Sights | 4263 | 7735 | 1310 | |
| Complete | Blued/Walnut | 18" No Sights | PREDATOR & KEY | SPECIAL | 1205 | |
| 6.8 Rem | 8720 | Blued/Walnut | 23" No Sights | 4202 | 7689 | 1204 |
| 7-30 Waters | 8720 | Blued/Walnut | 23" No Sights | 4275 | 7689 | 1203 |
| 8770 | SST/Composite | 23" No Sights | 4273 | 7735 | 1314 | |
| 30/30 Win | 8720 | Blued/Walnut | 23" No Sights | 4228 | 7689 | 1243 |
| 8770 | SST/Composite | 23" No Sights | 4266 | 7735 | 1316 | |
| 45/70 Gov’t | 8720 | Blued/Walnut | 23" No Sights | 4230 | 7689 | 1247 |
| 8770 | SST/Composite | 23" No Sights | 4271 | 7735 | 1320 | |
ACTION: Single shot, break open design (by use of trigger guard)
BARREL: Interchangeable by use of a removable barrel/frame hinge pin. Button rifled. Drilled & tapped for T/C scope mounts.
TRIGGER: Trigger pull preset at 2.75 to 4.00 lbs
HAMMER: Wide grooves in hammer spur for positive grip. Equipped with a manual firing pin selector — allowing for use of rimfire or centerfire barrels on the same frame.
STOCK AND FOREND: Walnut buttstock and matching forend.
WEIGHT: 5.4 lbs with 23" rifle barrel.
OVERAL LENGTH: 36-3/4" with 23" rifle barrel.
FINISH: Blued Steel, and Stainless Steel
SAFETY: Patented automatic hammer block with bolt interlock. patent # 5680722
SIGHTS: None. Barrel drilled & tapped for scope mounts.
*Note: The G2 Muzzleloader barrel will not fit on old-style Contender frames. No attempt should be made to alter the old-style Contender frame, or the G2 muzzleloader barrel to facilitate this installation.
G2 Contender® Pistols:
| \\\\ G2 Contender Pistols | |||||
|---|---|---|---|---|---|
| Model | Caliber | Barrel | Stock | Finish | Sights |
| No. 2702 | 22LR Match | 12" | Walnut | Blued | Adj. Sights |
| No. 2706 | 357 Mag | 12" | Walnut | Blued | Adj. Sights |
| No. 2708 | 44 Rem Mag | 12" | Walnut | Blued | Adj. Sights |
| No. 2720 | 45/410 Vent Rib | 12" | Walnut | Blued | Adj. Sights |
| No. 3556 | 223 Rem | 14" | Walnut | Blued | Adj. Sights |
| No. 3568 | 17 HMR | 14" | Walnut | Blued | Adj. Sights |
| No. 3552 | 22LR Match | 14" | Walnut | Blued | Adj. Sights |
| No. 3509 | 204 Ruger | 14" | Walnut | Blued | Adj. Sights |
| No. 3554 | 22 Hornet | 14" | Walnut | Blued | Adj. Sights |
| No. 3511 | 6.8 Rem | 14" | Walnut | Blued | Adj. Sights |
| No. 3558 | 7-30 Waters | 14" | Walnut | Blued | Adj. Sights |
| No. 3560 | 30/30 Win | 14" | Walnut | Blued | Adj. Sights |
| No. 3562 | 44 Rem Mag | 14" | Walnut | Blued | Adj. Sights |
| No. 3564 | 45/70 Gov't | 14" | Walnut | Blued | Adj. Sights |
| No. 3566 | 45/410 Vent Rib | 14" | Walnut | Blued | Adj. Sights |
| No. 3223 | 30-30 Win | 14" | SST | Rubber Grips | |
| No. 3209 | 17 HMR | 14" | SST | Rubber Grips | |
| No. 3202 | 44 Rem Mag | 14" | SST | Rubber Grips | |
ACTION: Single shot, break open design (by use of trigger guard)
BARREL: Interchangeable by use of a removable barrel/frame hinge pin. Button rifled. Drilled & tapped for T/C scope mounts.
TRIGGER: Trigger pull preset at 2.75 to 4.00 lbs
HAMMER: Wide grooves in hammer spur for positive grip. Equipped with external manual firing pin selector - allowing the shooter to use rimfire and centerfire barrels on the same frame.
GRIP AND FOREND: Ambidextrous Walnut pistol grip with finger grooves and butt cap. Matching forend.
WEIGHT: Approx. 3-1/2 lbs for 12" Approx. 3-3/4 lbs for 14"
OVERALL LENGTH: 15-1/2" for 12" barrel model 17-1/2" for 14" barrel model
FINISH: Blued & Stainless Steel
SAFETY: Patented (Patent #5680722) automatic hammer block with bolt interlock.
SIGHTS: Adjustable rear sight; ramp front sight blade.
45/410 Models include removable choke tube and wrench.
*Not for sale in California.
G2 Accessories
Pistol Barrels & Accessories
12" Contender® Pistol Barrel, Adjustable Sights
Accepts walnut forends No. 7614 and No. 7714 or composite forend.
12" CONTENDER® PISTOL BARREL WITH RIB, BEAD FRONT SIGHT
Accepts walnut forends No. 7614 and No. 7714 or composite forend.
14" Contender® Pistol Barrel, Adjustable Sights
Accepts walnut forends No. 7614 and No. 7714 or composite forend.
14" Contender® Pistol Barrel with Rib/Bead Front Sight
Accepts walnut forend No. 7614 and No. 7714 or composite forend.
G2 Contender® Black Walnut Pistol Grip
Select American Black Walnut carefully contoured with finger grooves to provide maximum control in a good looking grip. This grip is applicable to the G2 Contender® only. Left or right handed. Will not fit on the old-style Contender frame. No. 7707
G2 Contender® Rubber Pistol Grip
*Will not fit on the old-style Contender® Frame. No. 7755
G2™ Stainless Pistol Frame
No. 8750 G2 Contender Pistol Frame Stainless/Rubber
T/C Encore® Pistol Case with Extra Barrel Pouch
Designed specifically to fit the Encore Handgun - even when scoped. Side pouch holds one extra Encore pistol barrel - scoped or not. Padded to provide maximum protection. Embellished with the T/C logo.
No. 7481
Encore® & Contender® Pistol Case
A conventional styled pistol case for scoped pistols, with a pocket which holds an additional scoped barrel. Interior is long-wearing corduroy. Outside is rugged green/black nylon. For 10" thru 16-1/4" scoped pistols
No. 7472
Encore® & Contender® Attache-Style Pistol Case
This smartly styled case holds a scoped Encore or Contender Pistol, with 2 pockets which also hold 2 additional scoped b a r r e l s . Interior is long wearing corduroy. Outside is a rugged green/black nylon. For 10" thru 16-1/4" scoped pistols
No. 7404
Accessory Pistol Barrel Case
A deluxe padded cast to accommodate Encore or Contender pistol barrels. 3/8" thick closed cell foam padding is supported by a PVC hard frame for superior durability and protection. 600 polyester o u t s i d e cover and soft nylon tricot interior. Case will accommodate pistol barrels up to 15" with forearm attached, as well as mounted scope. Inside dimensions: 19-1/2" long x 4-1/2" wide x 2" high.
No. 7406
Wrist Ammo Carrier
For Contender® And Encore Convenient and fast accessibility to back up cartridges for single shot pistol and rifle shooters. Made of nylon with adjustable buckle and velcro fastener.
No. 8009
Contender® Combination Tool
This handy tool of cast steel and brass can be used for a number of purposes: to remove and replace the grip cap, the grip and the forend; to adjust the trigger; to adjust the rear sight elevation and windage. An added feature allows for removal or replacement of the choke tube in .45/.410 ga. barrels. Weighs 1.5oz. Measures 2-3/8" x 3-1/4" x 9/16".
No. 7992
Contender® Hammer Lock
Designed for the Contender® pistol and carbine, this hammer lock prevents the hammer from being cocked. Includes two keys.
No. 5032 For old-style Contenders
No. 5036 For G2 Contender
Cordura® Holsters for Contender® & Encore®
Specifically designed for large pistols like the Contender and Encore. Construction consists of thick waterproof foam padding, sandwiched between an outer shell of Cordura Nylon and an inner shell of nonabrasive nylon. Cordura Nylon is ten times more scuff resistant than leather. Open top style, offered in lengths and widths to accommodate either 10" or 12"/15" barrels. May be worn as shoulder holsters or on the belt. Right hand only.
No. 9540 Fits 10" Contender/Encore w/Iron Sights
No. 9542 Fits 10" Contender/Encore with Scope
No. 9544 Fits 12"/15" Contender/Encore w/Iron Sights
Contender® & Encore ® Sling & Swivel Components
No. 7993 Sling Only - A durable 1" black nylon sling for the Contender and Encore pistols.
No. 7994 Swivel Components for all Contender Pistols.
No. 9703 Swivel Components for Encore Pistols.
Barrels and Accessories
23" Contender® Rifle Barrel
Blued Finish. Drilled and Tapped for scope mount - no sights.
G2™ Stainless Barrels
No. 4222 14" Stainless .44 Mag (.223 Rem.)
No. 4247 23" Stainless .17 HMR
G2™ Rifle Composite Buttstock & Forend
No. 7733 G2 Contender® Rifle Buttstock Composite
No. 7735 G2 Contender® Rifle Forend Composite
G2 Contender® Rifle Butt Stock & Forend
No. 7625 Walnut Butt Stock for G2 Contender® Rifle Only, Will not fit old-style Contender®.
No. 7689 Walnut Forend — Fits all 16-1/4" and 23" G2 rifle barrels.
G2 Contender® .50 Cal. Muzzleloading Rifle
No. 7625 Walnut Butt Stock for G2 Contender Rifle Only. Will not fit the old-style Contender® frame.
Old-Style Contender® Rifle Butt Stock and forend
No. 7626 Walnut Butt Stock for old-style Contender® Carbine.
No. 7616 Walnut Forend — Fits all Super 16 and 21" tapered barrels.
No. 7628 Composite Butt Stock for Contender® Carbine.
No. 7629 Composite Forend - Fits all Super 16 and 21" tapered barrel.
Contender® Pistol Forends
No. 7612 Walnut, Fits 10" Bull and Vent Rib barrels
No. 7637 Composite, Fits 10" Bull and Vent Rib barrels
No. 7714 Walnut, G2 Style - Fits all 12" and 14" barrels.
No. 7614 Walnut, Fits 12" and 14" barrels.
No. 7616 Walnut, Fits all Super 16 barrels (tapered)
No. 7649 Composite, Fits all Super 16 barrels (tapered)
No. 7689 Walnut, Fits all 16-1/4" Bull & 23" G2 Contender Bbls.
No. 7730 Rubber Forend
The Original Contender and the G2 Contender® use the same barrels and forends. The stocks and grips are different and do not interchange.
Customer Service: 1-866-730-1614